Our supplier is releasing 2 DISCO DFL 7160 WBL Laser DAF Saw for $55k each.
This system was taken out of the fab and is currently in clean storage.
Please review the photos at the link below and let me know if you would be interested.
(Qty: 2)
DISCO DFL 7160 WBL Laser saw
DAF Tape cutting machine
Laser: Type-A
Laser working hours: 200
Laser source remaining: 48,000 Hours
Maximum work-piece size: ø300
X-Axis (Chuck table):
Processing range: 310 mm
Maximum feed speed: 600 mm/s
Y-Axis (Chuck table):
Processing range: 310 mm
Index step: 0.0001 mm
Index positioning accuracy: 0.003 or less/310 (Single error) 0.002 or less/5
Scale resolution: 0.0001 mm
Z-Axis:
Input range for lens height: -2.000 mm ~ 5.000 mm
Moving resolution: 0.00005 mm
Repeatability accuracy: 0.002 mm
θ-Axis (Chuck table):
Maximum rotating angle: 380°
320° in Positive (+) direction
60° in Negative (-) direction from initial position
Power consumption:
Processing: 1.2 kW
Warm-up: 1.1 kW
Maximum power: 69 kVA
Air pressure: 05-08 Mpa
Air maximum consumption: 275.0 L/min (ANR)
Clean air pressure: 05-08 MPa
Clean air maximum consumption: 200 L/min (ANR)
Water pressure (Spinner): 0.2-0 4 MPa
Water maximum flow rate (Spinner): 1.0 L/min
Exhaust duct capacity: 5.0 m³/min
Applicable tape frame: 2-12
Power supply: 200-240 VAC, ±10 %, 3-Phase
2012 vintage.
留言